It can be laid on any dry and levelled surface (tiles, concrete, clay,...). In case of the floor not being leelled it can be smoothed with levelling paste, asphalt shingle or simply with sand.
	It is not necessary to lay a filter, as the base of the cork is already fitted with it.
	We recommend to start with the largest wall of the area wicht¡ you wish to cover. Put a wedge between the wall and the fisrt row of planks so that there remains a space of 10 mm.
	Apply the glue along the upper part of the whole of the groove the way it is indicated on the drawing.
	Use a small lever to help you fix or fit in the last plank.
	Use a small hammer to fix the planks appropriately, always putting a piece of wood between the plank and the hammer so as not to damage the plank.
	Usually the last plank wll have to be cut to size. In order to do this take a plank, put it on top of another one along the wall and indicate where it will have to be cut.
	When the glue is dry, take off the wedges and fix the skirting board so that this space left for possible expansion is covered by the skirteing board.
	Cut the pieces close to doors so that the plank fits the door frame.
	Fix the junction panels where different floorings meet.